The PANASONIC SMT Splicing Tape, ESD Special Tape, 8mm is a reliable and indispensable tool for safe and efficient splicing in SMT processes. With 500 pieces per box, you can be assured of a constant supply for continuous production. The ESD (Electrostatic Discharge) feature protects sensitive electronic components from damage during splicing. Easy to apply, this tape provides consistent and exact connections, improving the quality and efficiency of your assembly line. With its excellent material, it is assured to be long-lasting, and thus the ideal choice for small and large companies alike. The ideal choice for professionals who require reliability and protection for their components.
In the world of SMT, precision isn’t optional — it’s the only language the machines speak. So when it’s time to splice, you don’t want excuses. You want tape that just works. This is it. Panasonic’s SMT Splicing Tape, ESD Special, 8mm is built to deliver clean, static-safe splices with zero drama.
This isn’t your average tape with a fancy label. It’s ESD-treated, meaning it plays nice with sensitive components and keeps static discharge out of your workflow. That matters more than you think, especially when the tiniest shock can turn a perfect board into dead weight. We’ve seen it happen. Not fun.
The 8mm width is spot-on for standard Panasonic feeder lines. The adhesion? Sharp, secure, and unapologetically tough. Once you place it, it stays put — even when the line’s running hot and fast. And the best part? No special training, no complicated steps. Just peel, press, move on. Smooth as it sounds.
Every box comes loaded with 500 pre-cut pieces. That means fewer interruptions, fewer reorders, and a team that keeps pushing forward without babysitting the tape. It’s designed for scale, for speed, and for serious production environments.
Bottom line: If you want fast, static-safe, no-compromise tape that actually respects your machines — this is the one you keep in stock. Everything else is just holding you back.
ESD Protection Built-In
This isn’t just tape with a fancy name. It’s treated to neutralize electrostatic discharge at the splice point — exactly where your sensitive components are most exposed. No sparks, no invisible killers, just clean, safe continuity.
Perfect Fit for 8mm Panasonic Feeders
We didn’t guess the specs. This tape was designed specifically for Panasonic 8mm carrier tapes. It snaps into your workflow without needing tweaks, hacks, or prayers. It fits. It runs. It finishes the job.
Aggressive Adhesion That Holds Under Pressure
Once you apply it, it’s not going anywhere. The industrial-grade adhesive grips the tape edges and doesn’t let go, even when the line’s moving fast and tension’s high. This tape keeps its promise.
Pre-Cut Convenience
500 pre-sized, ready-to-use strips in every box. No measuring. No trimming. No time wasted. Just grab, stick, and go. You’ll be wondering why you ever dealt with tape rolls in the first place.
Tool-Free Application
Forget the extra gear. No cutters, no heaters, no third hand needed. It’s simple: peel, press, done. Your operators could do it blindfolded (though we don’t recommend it).
Boosts Efficiency, Slashes Downtime
Every second matters on the floor. This tape helps you splice faster, smoother, with fewer errors, so your lines stay running and your targets stay on track. No more stop-and-go nonsense.
Clean Aesthetic, Zero Residue
Doesn’t fray. Doesn’t gum up your feeder. Leaves no sticky mess behind. Just a clean splice that runs like it’s always been part of the original reel.
High Volume, High Confidence
500 pieces per box. Enough to keep your line fed through long shifts and large runs. You’ve got enough to worry about — running out of tape shouldn’t be one of them.
It’s not a gimmick. This tape is engineered with anti-static properties to stop electrostatic discharge in its tracks. That means your sensitive components stay safe during splicing. No random zaps. No mystery failures. Just peace of mind.
It’s optimized for Panasonic 8mm SMT feeders. That’s where it performs best. Can it work on other machines? Possibly, but you’re gambling with alignment and feeder compatibility. Why risk it?
Zero. Nada. You don’t need heat tools, splicing jigs, or fancy aligners. Just peel, place, press. That’s it. Anyone on your floor can do it in seconds without slowing the line down.
Absolutely. The adhesive is strong, designed to grip hard and hold tight even when the reels are spinning and the pressure’s on. It won’t peel, shift, or fail mid-run.
No mess, no gunk, no surprises. It’s a clean splice — no sticky buildup, no feeder jams. When the job’s done, it’s like the splice was never there.
Because regular tape doesn’t protect your components from static, doesn’t always align cleanly, and tends to slow you down. This tape is faster, safer, and just flat-out better for serious production.
We have manufactured a full range of high quality SMT Splicing Products for the contract and OEM manufacturing industry since 1998. Professional excellence is our game and we are committed to ongoing improvements in all aspects of the business.
We are the only tape splicing manufacturer in the United States and our headquarter location in beautiful Santa Fe, New Mexico allows us to meet tight delivery requirements to anywhere in North America.
We strive to ensure customer satisfaction with every purchase. If you are not fully satisfied with your order, you may return unused products in their original packaging. Please contact our customer service team to initiate the return process.
2025 © Tapesplice